I own laptop near wireless all set,if I want to use it minus connecting next to thorny chain. How should I do it?

Answer:

If you don't already enjoy a Wireless Broadband modem or a Wireless Router, you'll need to purchase one. These start at around 50 bucks at a local electronics retailer. Then plug the router's power cord within. Install the router drivers and when it says to plug the router contained by to your computer use the network cable that come with the router. Follow through the prompts and consent to the software set up your network. If you want to protected your network use a WEP push button (10 digit seurity key) and remember to write it down some where. Some routers do not require you to do this, as they install themselves. After the router is plugged surrounded by and ready, plug your broadband modem exchange cards cable in to the port of your router. At this point, if everything is working, your laptop should say Wireless Networks Detected. If it doesn't, make sure your wireless adapter is ON. Either you'll enjoy a switch on the front or side, or you'll have to press Fn and a F# push button. Such as Fn-F4. If you get the Wireless Networks Detected message you're organized to go. Just doubleclick on the god down there that looks similar to an antenna and it brings up a list of connections. Your framework should be the one at the top of the list, next to the strongest signal. Double click on your network and it will connect. When you set your router up, it will hold asked you if you want to secure your connetion next to a WEP key. If you special yes, this is the point where you'll stipulation to enter they key you chose more rapidly. If you didn't, you are already connected and should be using your wireless adapter! Good luck!
If you have DSL or Cable internet you just need a wifi router. You will enjoy to connect the first time to configure your router but then you a moment ago turn your computer on.